General

1996 Cadillac Eldorado V8-4.6L VIN 9SECTION General
The Memory Seat System automatically returns the driver's seat to one of four present positions: MEMORY 1, MEMORY 2, EXIT 1, and EXIT 2. The Memory Seat system consist of the Memory Seat Switches, Memory Seat Module, Front and Rear Height Motors, Forward/Back Motor, and Recliner Motor and four Seat Position Sensors attached to each motor. The Memory Seat Module controls the movement of the four reversible motors that operate the driver's power seat. All the motors operate independently of each other. The Trunk Compartment Fuse Block BATT Fuse via ORN (CKT 1840) and LH Maxi Fuse(R) Block SEAT Circuit Breaker via RED (CKT 742) provide battery voltage to the Memory Seat Module and ground is provided via the BLK (CKT 850) circuit to ground G302.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.