Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC1993FLEETWOOD BROUGHAM V8-350 5.7LREPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSCUSTOMER INTERESTREMOTE KEYLESS ENTRY - INTERMITTENT OPERATION
1993 Cadillac Fleetwood Brougham V8-350 5.7L
Remote Keyless Entry - Intermittent Operation
1993 Cadillac Fleetwood Brougham V8-350 5.7LSECTION Remote Keyless Entry - Intermittent Operation
File In Section: 9 - Accessories
Bulletin No.: 43-90-17
Date: October, 1994
Subject:
Intermittent Operation of Remote Keyless Entry (RKE) in Very Cold Temperatures (Replace Module Assembly)
Models:
1993 Cadillac Fleetwood Brougham
1994 Cadillac Fleetwood
Condition
The RKE may be intermittent at temperatures below 20°F (-29°C). Operation should return to normal at higher temperatures.
Cause
An internal condition in the module does not allow the module to receive the signal from the transmitter.
Correction
Replace the module with new P/N 10269728, following the instructions in the Service Manual, Section 9K. Remember that after the module is replaced, BOTH transmitters must be reprogrammed at the same time.
Part Availability
Parts are expected to be available on 10/10/94 at GMSPO.
Warranty Information
For vehicles repaired under warranty, use:
Labor
Operation Labor Time
R4480 Use Published Labor Operation time.
Bulletin No.: 43-90-17
Date: October, 1994
Subject:
Intermittent Operation of Remote Keyless Entry (RKE) in Very Cold Temperatures (Replace Module Assembly)
Models:
1993 Cadillac Fleetwood Brougham
1994 Cadillac Fleetwood
Condition
The RKE may be intermittent at temperatures below 20°F (-29°C). Operation should return to normal at higher temperatures.
Cause
An internal condition in the module does not allow the module to receive the signal from the transmitter.
Correction
Replace the module with new P/N 10269728, following the instructions in the Service Manual, Section 9K. Remember that after the module is replaced, BOTH transmitters must be reprogrammed at the same time.
Part Availability
Parts are expected to be available on 10/10/94 at GMSPO.
Warranty Information
For vehicles repaired under warranty, use:
Labor
Operation Labor Time
R4480 Use Published Labor Operation time.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.