Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC1993FLEETWOOD BROUGHAM V8-350 5.7LREPAIR AND DIAGNOSISSPECIFICATIONSPRESSURE, VACUUM AND TEMPERATURE SPECIFICATIONSSTEERING
1993 Cadillac Fleetwood Brougham V8-350 5.7L
Steering
1993 Cadillac Fleetwood Brougham V8-350 5.7LSECTION Steering
Maximum Pressure Reading, Gauge Valve Open - 150 psi
Minimum Pressure Reading, Gauge Valve Closed - 1000 psi (see below)
CAUTION: Do not leave the valve closed for more than five seconds.
1. Fully close and reopen the valve three times.
2. Record the highest pressure readings each time the valve is closed.
3. Each reading should be at least 1000 psi; readings should be within 50 psi of each other.
Minimum Pressure Reading, Gauge Valve Closed - 1000 psi (see below)
CAUTION: Do not leave the valve closed for more than five seconds.
1. Fully close and reopen the valve three times.
2. Record the highest pressure readings each time the valve is closed.
3. Each reading should be at least 1000 psi; readings should be within 50 psi of each other.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.