Torque Specifications

1993 Cadillac Eldorado Base, 4.6 YSECTION Torque Specifications
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Column Bracket-To-Upper Support Bolts 20 (27)
Column Bracket-To-Instrument Panel Stud Nuts 20 (27)
Flexible Coupling Nuts 20 (27)
Intermediate Shaft-To-Steering Shaft Bolt 35 (47)
Lower Intermediate Shaft-To-Steering Gear Box Bolt 35 (47)
Steering Wheel Nut 30 (41)
Upper Intermediate Shaft-To-Steering Column Bolt 40 (54)
INCH Lbs. (N.m)Β 
Dimmer Switch Nut And Stud 35 (4)
Ignition Switch Screw And Stud 35 (4)
Lock Cylinder Screws 22 (2.5)
Lock Housing Cover Screws 80 (9)
Multifunction Switch Arm Screws 19 (2.2)
Multifunction Switch Screws 27 (3.1)
Support-To-Jacket Screws (1) 77 (8.8)
Turn Signal Switch Screws 30 (3.4)
(1) Steering column upper support assembly-to-column jacket assembly mounting screws.
Fig 1: View Of Fixed Steering Column Assembly (Except "L" Body & Sunbird)
G92F04473Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.