Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC1993DEVILLE BASE, 4D SEDANREPAIR AND DIAGNOSISBODY & FRAMESEATS - POWER MEMORYREMOVAL & INSTALLATIONFRONT SEAT CUSHIONREASSEMBLY
1993 Cadillac DeVille Base, 4D Sedan
Front Seat Cushion: Reassembly
1993 Cadillac DeVille Base, 4D SedanSECTION Reassembly
NOTE:
Heat pad is part of the pan assembly.
- Install the thigh support with the 2 retainers. Connect the air line to the manifold.
- Install the plastic cover to the pan and 6 rivets. See Figure .
- Install the cushion to the pan with general purpose adhesive 3M Part 08080.
- Install the cover.
- Install the hog rings (1). See Figure .
- Install the retaining clips (2) around the edge of the cover.
- Install the pump (6). See Figure .
- Connect the electrical connector (4) to the pump.
- Install 2 nuts (3).
- Install the relay (7).
- Connect the electrical connector (2) and the hose (5).
- Install 2 nuts (1).
- Install the seat function switch assembly and its electrical connection. See Figure .
- Install the seat cushion.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.