Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC1993DEVILLE BASE, 4D SEDANREPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONWHEEL ALIGNMENTWHEEL ALIGNMENT SPECIFICATIONS & PROCEDURESALIGNMENT SPECIFICATIONS
1993 Cadillac DeVille Base, 4D Sedan
Alignment Specifications
1993 Cadillac DeVille Base, 4D SedanSECTION Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range |
|---|---|---|
| Camber (Degrees) Front | .2 | -0.3 to 0.7 |
| Camber (Degrees) Rear | -0.3 | -0.8 to 0.2 |
| Caster (Degrees) Front | 3 | 2.5 to 3.5 |
| Caster (Degrees) Rear | N/A | N/A |
| Toe-In (Inches) Front | 0 | -.15 to 0.15 |
| Toe-In (Inches) Rear | .05 | -.05 to 0.15 |
| Toe-In (Millimeters) Front | 0 | -4 to 4 |
| Toe-In (Millimeters) Rear | 1.5 | -1.5 to 4 |
| Toe-In (Degrees) Front | 0 | -.3 to 0.3 |
| Toe-In (Degrees) Rear | .1 | -.1 10 0.3 |
| Toe-Out On Turns (Degrees) | N/A | N/A |
| Steering Axis Inclination (SAI) | N/A | N/A |
| Wheelbase (Inches) | 110.8 | N/A |
| Wheelbase (Millimeters) | 2815 | N/A |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.