Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC1991SEVILLE V8-300 4.9LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER HEAD ASSEMBLYSYSTEM SPECIFICATIONS
1991 Cadillac Seville V8-300 4.9L
System Specifications
1991 Cadillac Seville V8-300 4.9LSECTION System Specifications
Cylinder Head Bolts
1. Torque all bolts to [1] 38 ft. lbs.
2. Torque all bolts to [1] 68 ft. lbs.
3. Torque bolts 1, 3 and 4 to 90 ft. lbs.
[1] in specified sequence (refer to image)
Fig. 7 Cylinder Head Bolt Tightening Sequence:
1. Torque all bolts to [1] 38 ft. lbs.
2. Torque all bolts to [1] 68 ft. lbs.
3. Torque bolts 1, 3 and 4 to 90 ft. lbs.
[1] in specified sequence (refer to image)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.