Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Torque Specifications
Many service replacement assemblies such as front seat cushion and back frame assemblies and rear compartment pan assembly may have unthreaded nuts for attachment of seat adjusters, seatback and lap belts. Threads must be formed in these unthreaded nuts with either the original or a new proper size thread forming bolt. Apply sufficient straight-in pressure to start thread forming action of bolt into an unthreaded nut. Use of an appropriate tap will help.
| Application | Ft. Lbs. (N.m) |
|---|---|
| Front Seatback Frame-To-Recliner Mechanism | 15-21 (20-28) |
| Front Seat Bottom Frame-To-Reclining Actuator Mounting Support Screws | 14-18 (19-25) |
| Seat Adjuster-To-Seat Bottom Frame Attaching Bolts | 15-21 (20-28) |
| Seat Adjuster-To-Floor Pan Mounting Nuts Or Bolts And Folding Seat-To-Floor Pan Nuts | 18-24 (24-32) |
| Front Seatback Inner Pivot Hinge Arm-To-Seat Cushion Frame | 15-21 (20-28) |
| Seatback Lock Or Support-To-Seat Cushion And Back Frame Attaching Bolts | 15-21 (20-28) |
| Reclining Seatback Actuator Assembly-To-Cushion Frame And/Or Back Frame Bolts | 22-30 (30-40) |
| INCH Lbs. (N.m) | |
| Seatback Inertia Lock Attaching Nuts | 80-106 (9-12) |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.