Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSBUICK2019ENVISION BASEREPAIR AND DIAGNOSISELECTRICALGAUGESINSTRUMENT PANEL AND CONSOLE TRIMREPAIR INSTRUCTIONSINSTRUMENT PANEL OUTER TRIM COVER REPLACEMENT

2019 Buick Envision Base

Instrument Panel Outer Trim Cover Replacement

2019 Buick Envision BaseSECTION Instrument Panel Outer Trim Cover Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Instrument Panel Outer Trim Cover

Procedure

Pull away a segment of the front side door weather-strip to clear the edge of the trim cover.
Use a flat bladed plastic tool to remove.
Start at the back and work your way inboard to release the tabs.
Left up the cover to clear the body hinge pillar garnish molding.

NOTE:

Left side shown, right side similar.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.