Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2019ENVISION BASEREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINTERIOR TRIM AND PANELINGREPAIR INSTRUCTIONSCARGO TIE DOWN LOOP REPLACEMENT
2019 Buick Envision Base
Cargo Tie Down Loop Replacement
2019 Buick Envision BaseSECTION Cargo Tie Down Loop Replacement
| Callout | Component Name |
|---|---|
| 1 | Cargo Tie Down Loop Fastener [3x]
CAUTION:
Refer to Fastener Caution . Procedure Use a small flat-bladed tool to open cargo tie down loop bolt cap to gain access to cargo tie down loop fastener. Tighten 20 N.m (15 lb ft) |
| 2 | Cargo Tie Down Loop Assembly [3x] |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.