Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
K157 Video Processing Control Module X1
2019 Buick Envision BaseSECTION K157 Video Processing Control Module X1
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13582297 | J-35616-64B (LT BU) | J-38125-22 | Not Available | Not Available | Not Available | Not Available |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | GY/YE | 6972 | Camera Signal 2 + | I | UVH |
| 2 | 0.35 | BK/WH | 1351 | Signal Ground | I | UVH |
| 3 | 0.35 | BK/WH | 1351 | Signal Ground | I | UVH |
| 4 | 0.35 | GY/YE | 6972 | Camera Signal 2 + | I | UVH |
| 5 | 0.35 | WH/GN | 2628 | Left Side Vision Camera Video Signal (+) | I | UVH |
| 6 | 0.35 | BK/GN | 4664 | Left Side Camera Return | I | UVH |
| 7 | 0.35 | BK/BU | 4667 | Right Side Camera Return | I | UVH |
| 8 | 0.35 | WH/BU | 2627 | Right Side Vision Camera Video Signal (+) | I | UVH |
| 9 - 10 | - | - | - | Not Occupied | - | - |
| 11 | 0.35 | WH/BU | 6973 | Camera Signal 2 | I | UVH |
| 12 | 0.35 | GN/YE | 6840 | Auxiliary Device 2 Switched Voltage | I | UVH |
| 13 | 0.35 | GN/YE | 6840 | Auxiliary Device 2 Switched Voltage | I | UVH |
| 14 | 0.35 | WH/BU | 6973 | Camera Signal 2 | I | UVH |
| 15 | 0.35 | GY/GN | 2625 | Left Side Vision Camera Video Signal (-) | I | UVH |
| 16 | 0.35 | VT/GN | 4663 | Left Side Camera Control | I | UVH |
| 17 | 0.35 | VT/BU | 4666 | Right Side Camera Control | I | UVH |
| 18 | 0.35 | GY/BU | 2626 | Right Side Vision Camera Video Signal (-) | I | UVH |
| 19 - 20 | - | - | - | Not Occupied | - | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.