SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2019ENVISION BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTINTERIOR/EXTERIOR TRIMINTERIOR TRIM AND PANELINGREPAIR INSTRUCTIONSCENTER PILLAR UPPER TRIM PANEL REPLACEMENT
2019 Buick Envision Base

Center Pillar Upper Trim Panel Replacement

2019 Buick Envision BaseSECTION Center Pillar Upper Trim Panel Replacement
GM3931377Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. SIR Disabling and Enabling
  2. Center Pillar Lower Trim Panel Replacement 
  3. Remove the driver or passenger seat belt anchor plate tensioner cover and fastener Front Seat Belt Retractor Replacement
  4. Move the seat to the full forward position.
1 Center Pillar Upper Trim Panel

Procedure

  1. Pull the trim panel toward the inside of the vehicle to disengage the retainers.
  2. When replacing the center pillar upper trim panel, feed the seat belt through the panel.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.