SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2019ENVISION BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR, ENTERTAINMENT, AND NAVIGATION SYSTEMREPAIR INSTRUCTIONSDIGITAL RADIO, MOBILE TELEPHONE, AND VEHICLE LOCATION ANTENNA CABLE REPLACEMENT
2019 Buick Envision Base

Digital Radio, Mobile Telephone, and Vehicle Location Antenna Cable Replacement

2019 Buick Envision BaseSECTION Digital Radio, Mobile Telephone, and Vehicle Location Antenna Cable Replacement
GM3931458Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Windshield Garnish Molding Replacement
  2. Lower the right side of the headliner as needed to gain access to the cable. Headlining Trim Panel Replacement
1 Digital Radio and Mobile Telephone and Vehicle Location Antenna Cable

Procedure

  1. Disconnect the cable from the instrument panel harness.
  2. Disconnect the cable from the high frequency antenna.
  3. Disconnect the cable from the radio antenna cable.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.