SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2018REGAL BASEREPAIR AND DIAGNOSISSTEERINGSTEERING WHEEL AND STEERING COLUMNREPAIR INSTRUCTIONSSTEERING COLUMN LOWER TRIM COVER REPLACEMENT
2018 Buick Regal Base

Steering Column Lower Trim Cover Replacement

2018 Buick Regal BaseSECTION Steering Column Lower Trim Cover Replacement
GM4425239
Callout Component Name
Preliminary Procedure 
Steering Column Upper Trim Cover Replacement 
1 Steering Column Lower Trim Cover Bolt[3x]
CAUTION:

Refer to Fastener Caution .

Procedure

  1. Extend the steering column to the fully telescoped position.
  2. Remove the lower steering column lower trim cover bolt.
  3. Rotate the steering wheel to the left and to the right to remove the upper steering column lower trim cover bolts.

Tighten 
2.5 N.m (22 lb in)
2 Steering Column Lower Trim Cover
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.