K73 Telematics Communication Interface Control Module X1 (I30)

2018 Buick Regal BaseSECTION K73 Telematics Communication Interface Control Module X1 (I30)
GM4496253
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 13509987
  • Service Connector: 13506123
  • Description: 29-Way F 0.5 NANO, 1.2 MCON Series Sealed (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 19354361 EL-35616-58 (BK) J-38125-215A Not Available Not Available Not Available Not Available
II 19370818 J-35616-16 (LT GN) J-38125-215A Not Available Not Available Not Available Not Available
Pin Size Color Circuit Function Terminal Type ID Option
1 0.35 RD/YE 5040 Battery Positive Voltage II I30
2 - 3 - - - Not Occupied - -
4 0.35 BK 1750 Ground II I30
5 - - - Not Occupied - -
6 0.35 GN 2515 Keypad Control II I30
7 - - - Not Occupied - -
8 0.35 BK 1750 Ground II I30
9 0.35 WH/GN 1305 High Speed GMLAN Serial Data (-)9 I -
10 0.35 BU/GN 1304 High Speed GMLAN Serial Data (+)9 I -
11 0.35 WH 2514 Keypad Signal I -
12 0.35 WH/BU 5986 Serial Data Communication Enable I -
13 0.35 BARE 1792 Low Reference I -
14 0.35 BK/GY 5152 Voice Recognition Audio Low Reference I -
15 0.35 GY/YE 5149 Voice Recognition Audio Signal I -
16 0.35 WH/GN 1305 High Speed GMLAN Serial Data (-)9 I -
17 0.35 BU/GN 1304 High Speed GMLAN Serial Data (+)9 I -
18 - - - Not Occupied - -
19 0.35 YE 2516 Keypad Green LED Control I -
20 - - - Not Occupied - -
21 0.35 BK/BN 654 Cellular Telephone Microphone Low Reference I -
22 0.35 BU 655 Cellular Telephone Microphone Signal I -
23 0.35 GY/GN 1102 Low Speed GMLAN Serial Data #2 I -
24 - 25 - - - Not Occupied - -
26 0.35 BN 2517 Keypad Red LED Control I -
27 - - - Not Occupied - -
28 0.35 GY/WH 7211 Ethernet Bus 4 (+) I -
29 0.35 GY 7210 Ethernet Bus 4 (-) I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.