Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
K182 Parking Assist Control Module X1 (UD5/UD7)
2018 Buick Regal BaseSECTION K182 Parking Assist Control Module X1 (UD5/UD7)
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 19300660 | J-35616-64B (LT BU) | J-38125-215A | Not Available | Not Available | Not Available | Not Available |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | RD/GN | 5140 | Battery Positive Voltage | I | - |
| 2 | - | - | - | Not Occupied | - | - |
| 3 | 0.35 | GN/BN | 5852 | Rear Park Assist LED Disable Signal | I | UD5/UD7 |
| 4 | - | - | - | Not Occupied | - | - |
| 5 | 0.35 | BU/YE | 6105 | High Speed GMLAN Serial Data (+) 2 | I | - |
| 6 | 0.35 | BU/YE | 6105 | High Speed GMLAN Serial Data (+) 2 | I | - |
| 7 | 0.75 0.5 |
BK/WH BK/WH |
2751 2751 |
Signal Ground Signal Ground |
I I |
-TC2 UVC |
| 8 | 0.35 | GY/GN | 2555 | Rear Park Assist Disable Signal | I | UD5/UD7 |
| 9 | 0.35 | GN | 5060 | Low Speed GMLAN Serial Data | I | UD5/UD7 |
| 10 | - | - | - | Not Occupied | - | - |
| 11 | 0.35 | WH | 6106 | High Speed GMLAN Serial Data (-) 2 | I | - |
| 12 | 0.35 | WH | 6106 | High Speed GMLAN Serial Data (-) 2 | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.