B75C Multifunction Intake Air Sensor (LTG)

2018 Buick Regal BaseSECTION B75C Multifunction Intake Air Sensor (LTG)
GM2581486
Connector Part Information
  • Harness Type: Engine
  • OEM Connector: 13504800
  • Service Connector: 13583440
  • Description: 8-Way F 0.64 Series, Sealed (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-64B (LT BU) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Function Terminal Type ID Option
1 0.5 WH/BU 6289 Induction Air Temperature Sensor Signal I LTG
2 0.5 GY/RD 3053 Turbo Intake Pressure Sensor High Reference Bank 1 I LTG
3 0.5 BK/YE 548 Engine Control Sensors Low Reference (1) I LTG
4 0.5 YE 3054 Turbo Intake Pressure Sensor Signal Bank 1 I LTG
5 0.5 VT/BU 5294 Powertrain Main Relay Fused Supply 5 I LTG
6 0.5 GN/WH 492 Mass Air Flow Sensor Signal I LTG
7 0.75 BK/WH 151 Signal Ground I LTG
8 0.5 BN/GY 4008 Humidity Sensor Signal I LTG
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.