B75C Multifunction Intake Air Sensor (LGX)

2018 Buick Regal BaseSECTION B75C Multifunction Intake Air Sensor (LGX)
GM4708234
Connector Part Information
  • Harness Type: Engine
  • OEM Connector: 13596573
  • Service Connector: 19367010
  • Description: 8-Way F 64 Series, Sealed (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-64B (LT BU) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Function Terminal Type ID Option
1 0.5 WH/BU 6289 Induction Air Temperature Sensor Signal I LGX
2 0.35 WH/RD 3201 Throttle Inlet Absolute Pressure Sensor 5V Reference I LGX
3 0.35 BK/VT 2760 Intake Air Temperature Sensor Low Reference I LGX
4 0.35 YE/WH 3200 Throttle Inlet Absolute Pressure Sensor Signal I LGX
5 0.5 VT/BU 5294 Powertrain Main Relay Fused Supply 5 I LGX
6 0.5 GN/WH 492 Mass Air Flow Sensor Signal I LGX
7 0.75 BK/WH 151 Signal Ground I LGX
8 0.5 BN/GY 4008 Humidity Sensor Signal I LGX
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.