Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
B22 Brake Pedal Position Sensor
2018 Buick Regal BaseSECTION B22 Brake Pedal Position Sensor
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-64B (LT BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | BK/BN | 5360 | Brake Apply Sensor Low Reference | I | - |
| 2 | 0.35 | WH | 5359 | Brake Apply Sensor Control | I | - |
| 3 | 0.35 | BU/YE | 5361 | Brake Apply Sensor Signal | I | - |
| 4 | 0.35 | WH/GN | 5380 | Brake Position Sensor Signal | I | - |
| 5 | 0.35 | BK/YE | 5382 | Brake Position Sensor Low Reference | I | - |
| 6 | 0.35 | WH/RD | 5381 | Brake Position Sensor 5V Reference | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.