A98 Front Overhead Console Assembly

2018 Buick Regal BaseSECTION A98 Front Overhead Console Assembly
GM2593042
Connector Part Information
  • Harness Type: Headliner
  • OEM Connector: 13504097
  • Service Connector: 13504097
  • Description: 22-Way F 0.64 Kaizen Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 13575742 J-35616-64B (LT BU) J-38125-215A SAIT-A03T-M064 Yazaki 14 P P
II 13575867 J-35616-64B (LT BU) J-38125-215A SAIT-A03T-M064 Yazaki 14 P P
Pin Size Color Circuit Function Terminal Type ID Option
1 0.35 RD/GN 2440 Battery Positive Voltage II -
2 0.35 WH/YE 7557 LED Ambient Lighting Control 1 II -
3 0.35 GY 156 Courtesy Lamp Switch Signal II -
4 0.5
0.5
BK/BU
BK/GY
5307
128
Front Sunshade Switch Low Reference
Sunroof Switch Low Reference
I
I
C3U
CF5
5 0.5 BK 2550 Ground I -
6 - - - Not Occupied - -
7 0.5 WH/BN 6815 Inadvertent Power Control I -
8 0.35 GY 157 Interior Lamp Control II -
9 0.5
0.5
VT
BU/VT
5027
5027
Sunroof Switch Data 1 Signal
Sunroof Switch Data 1 Signal
I
I
C3U
CF5
10 0.5
0.5
BU/GY
WH/GN
3032
3031
Front Sunshade Switch Signal
Sunroof Vent Switch Signal
I
I
C3U
CF5
11 0.35 GN 2308 Passenger Air Bag Off Indicator Control II -
12 0.35 BU 2307 Passenger Air Bag On Indicator Control II -
13 0.35 VT 5234 Passenger Seat Belt Indicator Control II -
14 0.35 BN 2517 Keypad Red LED Control II -
15 0.35 YE 2516 Keypad Green LED Control II -
16 0.35 GN 2515 Keypad Control II -
17 0.35 GY 2514 Keypad Signal II -
18 0.35 WH 6816 Indicator Dimming Control II -
19 0.35 BU 4672 Dome Lamp Off Indicator Control II -
20 0.5
0.5
BK
BK/GY
128
128
Sunroof Switch Low Reference
Sunroof Switch Low Reference
I
I
C3U
CF5
21 0.35 GN 328 Interior Lamp Defeat Switch Signal II -
22 0.35 YE 6817 LED Backlight Dimming Control II -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.