SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2016ENCLAVE CONVENIENCEREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINSTRUMENT PANEL AND CONSOLE TRIMREPAIR INSTRUCTIONSINSTRUMENT PANEL COMPARTMENT TRIM PLATE REPLACEMENT (ENCLAVE)
2016 Buick Enclave Convenience

Instrument Panel Compartment Trim Plate Replacement (Enclave)

2016 Buick Enclave ConvenienceSECTION Instrument Panel Compartment Trim Plate Replacement (Enclave)
Fig 1: Instrument Panel Compartment Trim Plate (Enclave)
GM2885731Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement (Enclave) .
1 Instrument Panel Compartment Trim Plate

Procedure

  1. Carefully use a flat bladed plastic trim tool to release the retainer securing the instrument panel compartment trim plate to the instrument panel.
  2. Disconnect the electrical connections.
  3. When replacing the instrument panel compartment trim plate, transfer all necessary components.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.