SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2016ENCLAVE CONVENIENCEREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINSTRUMENT PANEL AND CONSOLE TRIMREPAIR INSTRUCTIONSINSTRUMENT PANEL CENTER COMPARTMENT REPLACEMENT (TRAVERSE)
2016 Buick Enclave Convenience

Instrument Panel Center Compartment Replacement (Traverse)

2016 Buick Enclave ConvenienceSECTION Instrument Panel Center Compartment Replacement (Traverse)
Fig 1: Instrument Panel Center Compartment (Traverse)
GM2835942Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Instrument Panel Center Compartment Liner
2 Instrument Panel Center Compartment Fastener (Qty: 2)
CAUTION:

Refer to Fastener Caution .
3 Instrument Panel Center Compartment Assembly

Procedures

  1. Use a flat bladed plastic trim tool in order to release the retainer clips securing the instrument panel center compartment to the instrument panel assembly.
  2. Disconnect the electrical connector.
  3. Transfer components as necessary.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.