SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2016ENCLAVE CONVENIENCEREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSPOWER DOOR LOCK SYSTEM AND RELEASE SYSTEMSREPAIR INSTRUCTIONSLIFTGATE LATCH REPLACEMENT
2016 Buick Enclave Convenience

Liftgate Latch Replacement

2016 Buick Enclave ConvenienceSECTION Liftgate Latch Replacement
Fig 1: Liftgate Latch
GM1853203Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Traverse)Liftgate Trim Panel Replacement (Enclave)Liftgate Trim Panel Replacement (Acadia) .
1 Liftgate Latch Screw (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Liftgate Latch Assembly

Procedure

  1. Disconnect the electrical connector.
  2. Remove the plastic tether before installing the liftgate latch.
  3. Calibrate the liftgate. Refer to Liftgate Calibration .
  4. Adjust the liftgate if needed. Refer to Liftgate Adjustment (Acadia)Liftgate Adjustment (Enclave)Liftgate Adjustment (Traverse) .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.