Roof Rear Console Replacement (Without RPO C3U)

2016 Buick Enclave ConvenienceSECTION Roof Rear Console Replacement (Without RPO C3U)
Fig 1: Roof Rear Console (Without RPO C3U)
GM2873628Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary ProcedureΒ 
Remove the video display assembly. Refer to Video Display Replacement (U42/C3U) .
1 Roof Console Assembly

Procedure

  1. Pull down to disengage the retainer clips.
  2. Disconnect the electrical connectors.
  3. If replacing the rear roof console, transfer all necessary components.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.