S3 Transmission Manual Shift Switch X1 (MDK/MH7/CZ2)

2015 Buick Regal Base, 2.0L Eng VIN X, AWDSECTION S3 Transmission Manual Shift Switch X1 (MDK/MH7/CZ2)
GM1862240
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 15269798
  • Service Connector: 19167753
  • Description: 6-Way F AIT II Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool
I 13575867 J-35616-64B (L-BU) J-38125-215A
Pin Size Color Circuit Function Terminal Type ID Option
1 0.5 VT/YE 43 Ignition Voltage I -
2 0.75 BK 1850 Ground I -
3 0.5 VT/YE 5526 Tap Up/Tap Down Switch Signal I -
4 0.5 VT/BK 7553 Park Lock Solenoid Control I -
5 0.5 YE 7554 Park Lock Solenoid Soft Control I -
6 0.5 WH/VT 5905 Key Capture/Column Lock Shift Position Signal I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.