Circuit/System Verification

2015 Buick Regal Base, 2.0L Eng VIN X, AWDSECTION Circuit/System Verification

B12A7 39

  1. Ignition ON.
  2. Verify DTC B12A7 39 is not set.
    • If DTC B12A7 39 is set 

      Replace the A33 Media Disc Player.

    • If DTC B12A7 39 is not set 
  3. All OK.

B12A7 45

  1. Ignition ON.
  2. Verify DTC B12A7 45 is not set.
    • If DTC B12A7 45 is set 
    1. Program the A33 Media Disc Player.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the A33 Media Disc Player.
      • If the DTC does not set
    3. All OK.
    • If DTC B12A7 45 is not set 
  3. All OK.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.