Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2015REGAL BASE, 2.0L ENG VIN X, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOLLISION/AVOIDANCEOBJECT DETECTION AND PEDESTRIAN PROTECTION SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURESDTC B094C: RIGHT SIDE OBJECT DETECTION CONTROL MODULEDIAGNOSTIC AIDS
2015 Buick Regal Base, 2.0L Eng VIN X, AWD
Diagnostic Aids
2015 Buick Regal Base, 2.0L Eng VIN X, AWDSECTION Diagnostic Aids
- The sensor modules are not identical and cannot be swapped from side to side.
- This DTC may be stored as a history DTC without affecting the operation of the side object sensor module - right.
- Do not replace the side object sensor module - right if DTC B094C is only set as a history DTC.
- The side object sensor module - right communicates on a private serial data bus with the side object sensor module - left. If programming is needed for module replacement, you must program side object sensor module - left which will then in turn program side object sensor module - right.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.