SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2015ENCLAVE CONVENIENCEREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINSTRUMENT PANEL TRIM AND CONSOLE TRIMREPAIR INSTRUCTIONSFRONT FLOOR CONSOLE ACCESSORY TRIM PLATE REPLACEMENT (ACADIA)
2015 Buick Enclave Convenience

Front Floor Console Accessory Trim Plate Replacement (Acadia)

2015 Buick Enclave ConvenienceSECTION Front Floor Console Accessory Trim Plate Replacement (Acadia)
Fig 1: Front Floor Console Accessory Trim Plate (Acadia)
GM2869279Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Front Floor Console Accessory Trim Plate

Procedures

  1. Apply the parking brake.
  2. Place the transmission control lever in the low range.
  3. Use a flat-bladed plastic trim tool in order to release the console accessory trim plate from the front floor console assembly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.