SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2015ENCLAVE CONVENIENCEREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEEXTERIOR/INTERIOR TRIMSEAT HARDWARE, SEAT TRIM, AND UPHOLSTERYREPAIR INSTRUCTIONS3RD ROW SEAT BACK LATCH RELEASE HANDLE REPLACEMENT
2015 Buick Enclave Convenience

3rd Row Seat Back Latch Release Handle Replacement

2015 Buick Enclave ConvenienceSECTION 3rd Row Seat Back Latch Release Handle Replacement
Fig 1: Identifying Rear Seat Number 2 Back Cushion Latch Release Handle
GM1853534Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the rear seat No. 2 back cushion cover and pad. Refer to 3rd Row Seat Back Cover and Pad Replacement .
  2. Remove the rear seat No. 2 cushion cover and pad. Refer to 3rd Row Seat Cushion Cover and Pad Replacement .
1 Rear Seat No. 2 Back Cushion Latch Release Handle Screw (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
4 N.m (35 lb in)
2 Rear Seat No. 2 Back Cushion Latch Release Handle

Procedure

  1. Note the routing of the cables for installation.
  2. Disconnect the cables from the head restraint and seat latch.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.