Quarter Upper Trim Panel Replacement (TB4)

2014 Buick Enclave ConvenienceSECTION Quarter Upper Trim Panel Replacement (TB4)
Fig 1: Quarter Upper Trim Panel (TB4)
GM1837017Courtesy of GENERAL MOTORS COMPANY
Quarter Upper Trim Panel Replacement (TB4)

Callout Component Name

Preliminary Procedures

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the seat belt anchor bolt. Refer to Rear Seat Number 2 Retractor Side Belt Replacement .
1 Rear Quarter Upper Trim Panel Screw
CAUTION: Refer to Fastener Caution .

TIP:Β  Open the access door to remove screw.
TightenΒ 
3 N.m (27 lb in)
2 Rear Quarter Upper Trim Panel Assembly
TIP:Β  Route the seat belt through trim panel.
3 Rear Quarter Upper Trim Panel Clip (Qty: 3)
4 Rear Quarter Upper Trim Panel Retainer
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.