Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Rear Turn Signal Lamp Bulb Replacement (Traverse)
2014 Buick Enclave ConvenienceSECTION Rear Turn Signal Lamp Bulb Replacement (Traverse)
Rear Turn Signal Lamp Bulb Replacement (Traverse)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the tail lamp. Refer to Tail Lamp Replacement (Traverse) . |
|
| 1 | Turn Signal Bulb Socket Procedure Turn the turn signal bulb socket counter-clockwise and pull from tail lamp. |
| 2 | Turn Signal Bulb Procedure Pull the turn signal bulb straight from the turn signal bulb socket. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.