Power Steering Fluid Reservoir Outlet Hose Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Power Steering Fluid Reservoir Outlet Hose Replacement
Fig 1: Power Steering Fluid Reservoir Outlet Hose & Clamps
GM2233917Courtesy of GENERAL MOTORS COMPANY
Power Steering Fluid Reservoir Outlet Hose Replacement

Callout Component Name

Preliminary Procedures

  1. Place drain pans under the vehicle.
  2. Cover the generator in order to prevent power steering fluid from dripping on the generator.
  3. Remove as much power steering fluid from the power steering fluid reservoir as possible.
  4. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
1 Power Steering Fluid Reservoir Outlet Hose Clamp (Qty: 2)
2 Power Steering Fluid Reservoir Outlet Hose

Procedure

  1. Disconnect the power steering fluid reservoir outlet hose from the 3 clips.
  2. Fill and bleed the power steering system. Refer to Power Steering System BleedingΒ .
  3. Clean any excess power steering fluid from the vehicle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.