SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 18 (HYBRID/EV COOLING SYSTEM)REPAIR INSTRUCTIONSGENERATOR CONTROL MODULE COOLANT PUMP REPLACEMENT
2013 Buick Regal Turbo Premium, Standard Trans

Generator Control Module Coolant Pump Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Generator Control Module Coolant Pump Replacement
WARNING: This page is about a different variant/trim than selected.
Fig 1: Generator Control Module Coolant Pump & Fasteners
GM2581854Courtesy of GENERAL MOTORS COMPANY
Generator Control Module Coolant Pump Replacement

Callout Component Name

Preliminary Procedures

  1. Remove intake Manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Remove generator Control module coolant outlet hose. Refer to Generator Control Module Coolant Outlet Hose Replacement .
1 Generator Control Module Coolant Pump Fastener (Qty: 3)
CAUTION:

Refer to Fastener Caution .
2 Generator Control Module Coolant Pump
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.