Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Circuit/System Description
The vehicle is equipped with a high voltage isolation monitor feature. The purpose of the isolation monitor is to test the resistance between the high voltage positive and negative direct current (DC) bus and chassis ground. The isolation monitoring system measures the resistance between the high voltage system and chassis ground in the following way. The Starter/Generator Control Module places an AC signal on the high voltage system and monitors its amplitude. A reduced amplitude return signal indicates a loss of resistance to chassis ground. This isolation monitor method is sometimes referred to as the active isolation monitor.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.