Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 88 (AUTOMATIC TRANSMISSION - AF40-6 - SPECIFICATIONS)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2013 Buick Regal Turbo Premium, Standard Trans
Fastener Tightening Specifications
2013 Buick Regal Turbo Premium, Standard TransSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Control Valve Body Cover Fastener | 13 N.m | 115 lb in |
| Control Valve Body Fastener | 10 N.m | 89 lb in |
| Oil Cooler Hose Connection | 10 N.m | 89 lb in |
| Oil Cooler Pipe Connector to Radiator | 38 N.m | 28 lb ft |
| Temperature Sensor (M36) | 10 N.m | 89 lb in |
| Temperature Sensor (MDK) | 7 N.m | 62 lb in |
| Torque Converter Fastener | 60 N.m | 44 lb ft |
| Transmission Control Fastener | 25 N.m | 18 lb ft |
| Transmission Control Module Fastener | 25 N.m | 18 lb ft |
| Transmission Fastener | 60 N.m | 44 lb ft |
| Transmission Fastener | 40 N.m | 30 lb ft |
| Transmission Fluid Check Bolt | 8 N.m | 71 lb in |
| Transmission Fluid Cooler Pipe Bracket Fastener | 10 N.m | 89 lb in |
| Transmission Fluid Filler Bolt | 40 N.m | 30 lb ft |
| Transmission Front Mount Fastener to Transmission | 62 N.m | 46 lb ft |
| Transmission Front Mount Through Bolt Fastener | 100 N.m | 74 lb ft |
| Transmission Line Pressure Check Plug | 10 N.m | 89 lb in |
| Transmission Mount Fastener - Left Side - to Chassis | 22 N.m | 16 lb ft |
| Transmission Mount Fastener - Left Side - to Transmission | 50 N.m + 60-75 degrees | 37 lb ft + 60-75 degrees |
| Transmission Mount Fastener - Left Side - to Transmission Mount | 20 N.m | 15 lb ft |
| Transmission Range Selector Lever Fastener | 15 N.m | 11 lb ft |
| Transmission Rear Mount Fastener (1, 3) | 100 N.m | 74 lb ft |
| Transmission Rear Mount Fastener (2) | 62 N.m | 46 lb ft |
| Transmission Rear Mount Through Bolt Fastener | 100 N.m | 74 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.