Sunroof Housing Drain Gutter Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Sunroof Housing Drain Gutter Replacement
WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Sunroof Housing Drain Gutter
GM2019835Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove sunroof window front and rear windows. Refer to Sunroof Window Replacement - FrontΒ  and Sunroof Window Replacement - RearΒ .
  2. Remove sunroof housing assembly. Sunroof Housing ReplacementΒ .
1 Sunroof Housing Drain Gutter

Procedure

  1. Do not remove the motor or sunshades.
  2. Remove clips from the sunroof housing drain gutter bracket on the left and right side.
  3. Verify sunroof window height and opening fit adjustment. Refer to Sunroof Window Height and Opening Fit AdjustmentΒ .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.