Radio Speaker Amplifier Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Radio Speaker Amplifier Replacement
WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radio Speaker Amplifier
GM2193483Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure:Β 
Remove the rear compartment side trim panel. Refer to Rear Compartment Side Trim Panel Replacement .
1 Radio Speaker Amplifier Nut (Qty: 3)
2 Radio Speaker Amplifier Assembly

Procedure

  1. Disconnect the electrical connectors.
  2. For programming and set up information, refer to Control Module References .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.