Outside Rearview Mirror Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Outside Rearview Mirror Replacement
WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Outside Rearview Mirror
GM2019628Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure:Β 
Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement .
1 Outside Rearview Mirror Fastener (Qty: 3)
CAUTION: Refer to Fastener Caution .

Procedure:Β 
Disconnect the mirror electrical connector.

Tighten:Β  9 N.m (80 lb in)

2 Outside Rearview Mirror Assembly
Tip:Β  The mirror assembly must be ordered and assembled prior to being installed to the vehicle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.