SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 239 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - G14 THROUGH K71 TCM X2)COMPONENT CONNECTOR END VIEWSK9 BODY CONTROL MODULE X2
2013 Buick Regal Turbo Premium, Standard Trans

K9 Body Control Module X2

2013 Buick Regal Turbo Premium, Standard TransSECTION K9 Body Control Module X2
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM2180237
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 13277344
  • Service Connector: 13576637
  • Description: 27-Way F 64 Series (L-BU)
 Terminal Part Information
  • Pins: 1, 2
  • Terminated Lead: Pending
  • Release Tool: 12094429
  • Diagnostic Test Probe: J-35616-35 (VT)
  • Terminal/Tray: SNAC-A061T-M2.8/20
  • Core/Insulation Crimp: E/A
  • Pins: 3, 4
  • Terminated Lead: Pending
  • Release Tool: 12094429
  • Diagnostic Test Probe: J-35616-35 (VT)
  • Terminal/Tray: SNAC-A081T-M2.8/20
  • Core/Insulation Crimp: A/D
  • Pins: 5, 7, 8, 10, 11, 13, 14, 16, 21-27
  • Terminated Lead: Pending
  • Release Tool: 12094429
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
K9 Body Control Module X2

Pin Size Color Circuit Function Option
1 1.5 RD/WH 1040 Battery Positive Voltage -
2 1.5 BK 1650 Ground -
3 2.5 RD/WH 1040 Battery Positive Voltage -
4 2.5 RD/BN 1440 Battery Positive Voltage -
5 0.5 GY 157 Interior Lamp Control -
6 - - - Not Used -
7 0.5 BU/YE 5361 Brake Apply Sensor Signal -
8 0.5 YE 6817 LED Backlight Dimming Control -
9 - - - Not Used -
10 0.35 WH/BU 278 Ambient Light Sensor Signal -
11 0.5 VT/YE 5526 Tap Up/Tap Down Switch Signal MDH
0.5 VT/YE 5526 Tap Up/Tap Down Switch Signal MH8
12 - - - Not Used -
13 0.5 WH 5381 5 Volt Reference -
14 0.5 BU/VT 1788 Traction Control Switch Signal (1) -
15 - - - Not Used -
16 0.5 GY 3273 Remote Function Actuator Return -
17-20 - - - Not Used -
21 0.5 GN/GY 6135 Linear Interconnect Network Bus 4 -
22 0.5 GN 5060 Low Speed GMLAN Serial Data -
23 0.5 WH 2501 High Speed GMLAN Serial Data (-) (1) -
24 0.5 BU 2500 High Speed GMLAN Serial Data (+) (1) -
25 0.5 GY/WH 3272 Remote Function Actuator Supply Voltage -
26 0.35 GN/WH 111 Hazard Switch Signal -
27 0.5 YE/GN 3274 Remote Function Actuator Transmit Signal -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.