SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 239 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - G14 THROUGH K71 TCM X2)COMPONENT CONNECTOR END VIEWSK71 TRANSMISSION CONTROL MODULE X1 (MDK)
2013 Buick Regal Turbo Premium, Standard Trans

K71 Transmission Control Module X1 (MDK)

2013 Buick Regal Turbo Premium, Standard TransSECTION K71 Transmission Control Module X1 (MDK)
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM2216893
Connector Part Information
  • Harness Type: Engine
  • OEM Connector: 13110732
  • Service Connector: Pending
  • Description: 16-Way F 64/1.5 Series, Sealed (BK)
 Terminal Part Information
  • Pins: 1, 5, 9
  • Terminated Lead: Pending
  • Release Tool: Pending
  • Diagnostic Test Probe: Pending
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
  • Pins: 6-8, 11-12, 14
  • Terminated Lead: Pending
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: 7116-4720-02/14
  • Core/Insulation Crimp: J/J
K71 Transmission Control Module X1 (MDK)

Pin Size Color Circuit Function Option
1 1.5 RD 40 Battery Positive Voltage -
2-4 - - - Not Available -
5 0.75 OG/BK 1786 Park/Neutral Signal -
6 0.5 WH 2501 High Speed GMLAN Serial Data Bus - -
7 0.5 WH/BK 2500 High Speed GMLAN Serial Data Bus+ -
8 0.5 WH/BK 2500 High Speed GMLAN Serial Data Bus+ -
9 1.5 BK 451 Ground -
10 - - - Not Available -
11 0.5 PK 139 Ignition Voltage -
12 0.5 YE 143 Accessory Voltage -
13 - - - Not Used -
14 0.5 WH 2501 High Speed GMLAN Serial Data Bus - -
15-16 - - - Not Available -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.