SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 239 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - G14 THROUGH K71 TCM X2)COMPONENT CONNECTOR END VIEWSK19 SUSPENSION CONTROL MODULE (F45)
2013 Buick Regal Turbo Premium, Standard Trans

K19 Suspension Control Module (F45)

2013 Buick Regal Turbo Premium, Standard TransSECTION K19 Suspension Control Module (F45)
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM2180240
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 24414883
  • Service Connector: 13576557
  • Description: 32-Way F 0.64 Micro Quadlok Series (BU)
 Terminal Part Information
  • Pins: 1, 18
  • Terminated Lead: Pending
  • Release Tool: 12094429
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: 928999-5/15
  • Core/Insulation Crimp: K/K
  • Pins: 2-5, 11, 13-16,
  • Terminated Lead: Pending
  • Release Tool: 12094429
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: 928999-5/15
  • Core/Insulation Crimp: J/J
  • Pins: 6-10, 12, 20-25, 28-31
  • Terminated Lead: Pending
  • Release Tool: 12094429
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: 928999-5/15
  • Core/Insulation Crimp: H/H
K19 Suspension Control Module (F45)

Pin Size Color Circuit Function Option
1 0.75 RD/WH 1040 Battery Positive Voltage -
2 0.75 GN/GY 1119 Right Rear Damping Servo Control -
3 0.75 BN/GN 1118 Right Rear Damping Servo Supply Voltage -
4 0.75 BU/GY 1114 Left Rear Damping Servo Supply Voltage -
5 0.75 GN/VT 1115 Left Rear Damping Servo Control -
6 0.5 WH/BU 5986 Serial Data Communication Enable -
7 0.5 WH/YE 3256 Rear Accelerometer Signal -
8 0.5 WH/VT 3259 Left Front Accelerometer Signal -
9 0.5 WH/BN 3253 Right Front Accelerometer Signal -
10 0.5 WH 1100 Left Front Wheel Damping Accelerometer Signal -
11 0.5 WH 1106 Right Front Wheel Damping Accelerometer Signal -
12 0.75 YE/RD 1817 Left Front Wheel Accelerometer Voltage Reference -
13 0.75 GY/BU 1113 Left Front Damping Servo Control -
14 0.75 BN/WH 1107 Left Front Damping Servo Supply Voltage -
15 0.75 BN/BU 1116 Right Front Damping Servo Supply Voltage -
16 0.75 GY/WH 1117 Right Front Damping Servo Control -
17 0.75 RD/WH 1040 Battery Positive Voltage -
18 0.75 BK 2350 Ground -
19 0.75 BK 2350 Ground -
20 0.75 BK/BN 1099 Left Front Wheel Damping Accelerometer Low Reference -
21 0.5 BU 2500 High Speed GMLAN Serial Data (+) (1) -
22 0.5 BU 2500 High Speed GMLAN Serial Data (+) (1) -
23 0.5 BU 2500 High Speed GMLAN Serial Data (+) (1) -
24 0.5 WH 2501 High Speed GMLAN Serial Data (-) (1) -
25 0.5 WH 2501 High Speed GMLAN Serial Data (-) (1) -
26 0.5 WH 2501 High Speed GMLAN Serial Data (-) (1) -
27-28 - - - Not Used -
29 0.5 BU/YE 6105 High Speed GMLAN Serial Data (+) (2) -
30 0.5 WH 6106 High Speed GMLAN Serial Data (-) (2) -
31-32 - - - Not Used -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.