Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 239 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - G14 THROUGH K71 TCM X2)COMPONENT CONNECTOR END VIEWSK17 ELECTRONIC BRAKE CONTROL MODULE
2013 Buick Regal Turbo Premium, Standard Trans
K17 Electronic Brake Control Module
2013 Buick Regal Turbo Premium, Standard TransSECTION K17 Electronic Brake Control Module
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
|
K17 Electronic Brake Control Module
| Pin | Size | Color | Circuit | Function | Option |
|---|---|---|---|---|---|
| 1 | 6 | RD/VT | 1640 | Battery Positive Voltage | - |
| 2 | - | - | - | Not Used | - |
| 3 | 0.5 | YE | 872 | Wheel Speed Sensor Signal Right Front | - |
| 4 | 0.5 | GY/BN | 7065 | Low Reference | - |
| 5 | 0.5 | BU | 2500 | High Speed GMLAN Serial Data (+) (1) | - |
| 6 | 0.5 | WH | 2501 | High Speed GMLAN Serial Data (-) (1) | - |
| 7 | 0.5 | GY | 1903 | AAS Wheel Speed Sensor Signal Left Front | UYS |
| 8-9 | - | - | - | Not Used | - |
| 10 | 0.5 | GY/YE | 7128 | Low Reference | - |
| 11 | 0.5 | VT | 882 | Wheel Speed Sensor Signal Right Rear | - |
| 12 | - | - | - | Not Used | - |
| 13 | 6 | BK | 1450 | Ground | - |
| 14 | 0.5 | GN/BN | 2087 | Combined Vehicle Inertial Sensor Supply Voltage | - |
| 15-16 | - | - | - | Not Used | - |
| 17 | 0.5 | BU | 2500 | High Speed GMLAN Serial Data (+) (1) | - |
| 18 | 0.5 | WH | 2501 | High Speed GMLAN Serial Data (-) (1) | - |
| 19 | - | - | - | Not Used | - |
| 20 | 0.5 | WH | 6106 | High Speed GMLAN Serial Data (-) (2) | - |
| 21 | 0.5 | BU/YE | 6105 | High Speed GMLAN Serial Data (+) (2) | - |
| 22-24 | - | - | - | Not Used | - |
| 25 | 2.5 | RD/BU | 1542A | Battery Positive Voltage | - |
| 26 | - | - | - | Not Used | - |
| 27 | 0.5 | GY | 830 | Wheel Speed Sensor Signal Left Front | - |
| 28 | 0.5 | GY/WH | 7064 | Low Reference | - |
| 29 | 0.5 | GN/GY | 333 | Brake Fluid Level Sensor Signal | - |
| 30-32 | - | - | - | Not Used | - |
| 33 | 0.5 | WH/BU | 5986 | Serial Data Communication Enable | - |
| 34 | - | - | - | Not Used | - |
| 35 | 0.5 | GY/BK | 7127 | Low Reference | - |
| 36 | 0.5 | BU | 884 | Wheel Speed Sensor Signal Left Rear | - |
| 37 | - | - | - | Not Used | - |
| 38 | 2.5 | BK | 1450 | Ground | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.