B119 Multi-axis Acceleration Sensor

2013 Buick Regal Turbo Premium, Standard TransSECTION B119 Multi-axis Acceleration Sensor
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM2231630
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 19178521
  • Service Connector: 13314079
  • Description: 6-Way F 0.64 Series, Sealed (BK)
Terminal Part Information
  • Terminated Lead: Pending
  • Release Tool: J-38125-215A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SAIT-A03T-M064/14
  • Core/Insulation Crimp: P/P
B119 Multi-axis Acceleration Sensor

Pin Size Color Circuit Function Option
1 0.5 WH 6106 High Speed GMLAN Serial Data (-) (2) -
2 - - - Not Used -
3 0.5 BU/YE 6105 High Speed GMLAN Serial Data (+) (2) -
4 - - - Not Used -
5 0.5 GN/BN 2087 Combined Vehicle Inertial Sensor Supply Voltage -
6 0.5 BK 2350 Ground -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.