Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 227 (HYBRID/EV ENERGY STORAGE SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2013 Buick Regal Turbo Premium, Standard Trans
Fastener Tightening Specifications
2013 Buick Regal Turbo Premium, Standard TransSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Auxiliary Tray Fasteners | 22 N.m | 16 lb ft |
| Battery Energy Control Module Fasteners | 9 N.m | 80 lb in |
| Battery Energy Control Module Wiring Junction Block Fasteners | 9 N.m | 80 lb in |
| BDU Housing Fasteners | 6 N.m | 53 lb in |
| Cut-Off Switch Screw | 4 N.m | 35 lb in |
| Disconnect High Voltage Switch Mounting Fastener | 9 N.m | 80 lb in |
| Drive Motor Generator Battery Cable Bracket Fasteners | 22 N.m | 16 lb ft |
| Drive Motor Generator Battery Cable Tray Fasteners | 22 N.m | 16 lb ft |
| Drive Motor Generator Battery Cable U V W Terminal Fasteners | 9 N.m | 80 lb in |
| Generator Battery Disconnect Relay Fasteners | 9 N.m | 80 lb in |
| Generator Battery Fasteners | 22 N.m | 16 lb ft |
| Generator Battery Fuse Fasteners | 9 N.m | 80 lb in |
| Generator Control and Battery Module Mounting Fasteners | 22 N.m | 16 lb ft |
| Generator Control Module Cable Cover Fasteners | 9 N.m | 80 lb in |
| Generator Control Module Cover Fasteners | 9 N.m | 80 lb in |
| Generator Control Module Fasteners | 9 N.m | 80 lb in |
| High Voltage Cables-to-Battery Block Fasteners | 9 N.m | 80 lb in |
| HVIL Connector | 4 N.m | 35 lb in |
| Intermediate Duct to Power Pack Tray | 9 N.m | 80 lb in |
| Outlet Duct Adapter Fasteners | 6 N.m | 53 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.