Air Conditioning Refrigerant Temperature Sensor Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Air Conditioning Refrigerant Temperature Sensor Replacement
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Air Conditioning Refrigerant Temperature Sensor
GM2020228Courtesy of GENERAL MOTORS COMPANY
Air Conditioning Refrigerant Temperature Sensor Replacement

Callout Component Name

Preliminary Procedures

  1. Remove instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
  2. Remove the floor air outlet duct - right side. Refer to Floor Air Outlet Duct Replacement - Right Side .
1 Air Conditioning Refrigerant Temperature Sensor

Procedure

  1. Disconnect the refrigerant temperature sensor electrical connector.
  2. Twist and pull the refrigerant temperature sensor from the HVAC module assembly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.