SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 167 (POWER STEERING SYSTEM)REPAIR INSTRUCTIONSSTEERING LINKAGE OUTER TIE ROD REPLACEMENT
2013 Buick Regal Turbo Premium, Standard Trans

Steering Linkage Outer Tie Rod Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Steering Linkage Outer Tie Rod Replacement
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rack and Pinion Outer Tie Rod End
GM1779542Courtesy of GENERAL MOTORS COMPANY
Steering Linkage Outer Tie Rod Replacement

Callout Component Name

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
1 Steering Linkage Outer Tie Rod Nut
CAUTION:

Refer to Fastener Caution .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.