SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 164 (POWER DOOR LOCK SYSTEM AND RELEASE SYSTEMS)REPAIR INSTRUCTIONSREAR COMPARTMENT LID OUTSIDE HANDLE REPLACEMENT
2013 Buick Regal Turbo Premium, Standard Trans

Rear Compartment Lid Outside Handle Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Rear Compartment Lid Outside Handle Replacement
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Compartment Lid Outside Handle
GM2019611Courtesy of GENERAL MOTORS COMPANY
Rear Compartment Lid Outside Handle Replacement

Callout Component Name
Preliminary Procedure 
Remove rear compartment lid inner panel trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .
1 Rear Compartment Lid Outside Handle Fastener (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5 N.m (22 lb in)
2 Rear Compartment Lid Outside Handle

Procedure

  1. Remove the caps covering the outer 2 fasteners, apply foam adhesive tape upon installation to help retain the caps.
  2. Disconnect the electrical connector.
  3. Transfer components as necessary.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.