Instrument Panel Lower Extension Side Trim Panel Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Instrument Panel Lower Extension Side Trim Panel Replacement
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Panel Lower Extension Side Trim Panel
GM2020205Courtesy of GENERAL MOTORS COMPANY
Instrument Panel Lower Extension Side Trim Panel Replacement

Callout Component Name

Preliminary Procedures

  1. Remove instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
  2. Remove the instrument panel molding - passenger side. Refer to Instrument Panel Molding Replacement - Passenger Side .
1 Instrument Panel Lower Extension Side Trim Panel Fastener (Qty: 3)
2 Instrument Panel Lower Extension Side Trim Panel
Procedure 
Grasp the trim panel assembly and pull rearward disengaging the retainer securing it to the instrument panel.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.