Instrument Panel Compartment Door Assembly Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Instrument Panel Compartment Door Assembly Replacement
WARNING: This page is about a different car, the 2012 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Panel Compartment Door Assembly
GM2351288Courtesy of GENERAL MOTORS COMPANY
Instrument Panel Compartment Door Assembly Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the instrument panel compartment assembly. Refer to Instrument Panel Compartment Replacement .
  2. Disconnect the compartment door dampener. Refer to Instrument Panel Compartment Door Dampener Replacement .
1 Instrument Panel Compartment Door Hinge Pin (Qty: 2)
Procedure 
Use an appropriate tool in order to remove the door hinge pins.
2 Instrument Panel Compartment Door Assembly
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.