SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 119 (AUTOMATIC TRANSMISSION - 6T45 - REPAIR INSTRUCTIONS - OFF VEHICLE)REPAIR INSTRUCTIONS - OFF VEHICLETRANSMISSION FLUID PUMP DISASSEMBLE (6T40/45)FLUID PUMP DISASSEMBLE
2013 Buick Regal Turbo Premium, Standard Trans

Fluid Pump Disassemble

2013 Buick Regal Turbo Premium, Standard TransSECTION Fluid Pump Disassemble
WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Fluid Pump
GM1891425Courtesy of GENERAL MOTORS CORP.
Fluid Pump Disassemble

Callout Component Name
WARNING: Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.